Ticket

zurück zur Ticket Übersicht

Projekt RCM Ultimate
Zusammenfassung OK button is not active, if laptimes i splitted and RCM is configured to show only 2 digits
Sequenz 3948
Klassifikation Bug
Priorität Low
Status Done
Startdatum 16.07.2025
Fälligkeitsdatum 16.07.2025
Verantwortlich
Version 2.5.5
Aufwand 0
Beschreibung To have confidence I understood this correctly, I did a test event with the simulator again. And manipulated a round, so I could split it in 2 laps with the result of each lap should be more than the best time.

However I ended up in the same situation. I tried to split a manipulated lap with a time of 02:06.11 (lap 7) into 2 laps. Which it showed as 01:03.05 per lap. Where the best lap time of that pilot was 01:02.21

The weird thing I noticed was if I added a 0 (also worked with 1) behind the per lap time (01:03.050), the OK button did became available.
However then pushing the OK button gave some unexpected results.
It added a lap (9) of 01:03.05, but the selected lap (7) to split became 1:44.03.
In my previous experience with splitting laps, it should split the lap into 2 equal lap times, following each other (e.g. lap 7 and 8 with the same time of 01:03.05)

I added the screenshots of my result as well as an export of the test event.
Tested with:
Section: Test - Sectie
Heat 1
Kwalifcatie 1
Pilot: Test rijder 3
Lap: 7

Screenshots description:
Split_normal.png : For me this is the expected screen, however unable to push "OK"
Split_added_0.png: The split lap screen, with a 0 added to the end of the per lap time. (OK button 'ungreyed')
result_before_split.png: The lap times before splitting lap 7 with the added 0
result_after_split_with_added_0.png: The lap times after the splitting (notice lap 7 and 9)

Change history

Zeitstempel Wer Änderung
16.07.2025 09:37:23 Ticket erstellt
16.07.2025 09:38:02 Felix Romer Feld: Status
Alter Wert: Opened
Neuer Wert: Running
16.07.2025 09:41:09 Felix Romer Feld: Status
Alter Wert: Running
Neuer Wert: Done